Item successfully added to basket
Item removed from basket

Our Wi-Fi network names explained

Normally, our Wi-Fi network will show up on your devices as either Glide or Glide-5. If you can see it, you should connect to this.

If you can’t see one of the above, there may be a network available called Glide_2.4. This means we have in place what is known as a Split SSID, meaning the wireless frequency spectrum has been segmented into the 2.4ghz and 5ghz radio bands to ease congestion. If your device can only see Glide_2.4, you should use this network.

If Glide_Secure is available, you’ll need to register an account on the open network first before you can connect to this.

Eduroam is an international roaming service for users in academia, and provides researchers, teachers and students secure network access when visiting institutions other than their own. It is broadcast by our equipment, but we do not manage it in the same way we do the StudentCom network. You can read more information on Eduroam (UK) here.

 

Troubleshooting

Unable to see any Wi-Fi network

If you are unable to see any of the networks listed above, make sure your device’s Wi-Fi is turned on. Some devices may have physical switches on the outside of the case. You should also try rebooting the device.

Occasionally there may be an outage to our equipment, which can result in our Wireless Access Points not broadcasting. You can check if there are any ongoing incidents to your accommodation on our Twitter feed @GlideStuHelp. You can read more about outages and how we handle them here.

 

Unable to join the Wireless Network

If your device can see the network but cannot join it, this can often be accompanied by authentication errors or the network immediately showing as ‘saved’.

You can try forgetting the network and rejoining, and rebooting your device. iOS devices also have the option to perform a Full Network Reset, which may help.

For more Wi-Fi loss of service troubleshooting, see here.

Contact the ServiceDesk

If you are unable to resolve the issue yourself, or have any further questions, please feel free to get in touch. You can either use the form below, or see here for alternative methods. You will need to have either your Username or Account ID ready when you contact us.

Did this article solve your problem? (Yes / No)

Need to raise a support ticket?
*
*
This should be the email address you originally registered with.
*